Differentials and Traction
The open differential always applies the same amount
of torque to each wheel. There are two factors that determine how
much torque can be applied to the wheels: equipment and traction. In dry
conditions, when there is plenty of traction, the amount of torque applied to
the wheels is limited by the engine and gearing; in a low traction situation,
such as when driving on ice, the amount of torque is limited to the greatest
amount that will not cause a wheel to slip under those conditions. So, even
though a car may be able to produce more torque, there needs to be enough
traction to transmit that torque to the ground. If you give the car more gas
after the wheels start to slip, the wheels will just spin faster.
If you've ever driven on ice, you
may know of a trick that makes acceleration easier: If you start out in second
gear, or even third gear, instead of first, because of the gearing in the
transmission you will have less torque available to the wheels. This will
make it easier to accelerate without spinning the wheels.
Now what happens if one of the drive wheels has good
traction, and the other one is on ice? This is where the problem with open
differentials comes in.
Remember that the open differential always applies the same
torque to both wheels, and the maximum amount of torque is limited to the
greatest amount that will not make the wheels slip. It doesn't take much torque
to make a tire slip on ice. And when the wheel with good traction is only
getting the very small amount of torque that can be applied to the wheel with
less traction, your car isn't going to move very much.
Off Road
Another time open differentials
might get you into trouble is when you are driving off-road. If you have a
four-wheel drive truck, or an SUV, with an open differential on both the front
and the back, you could get stuck. Now, remember -- as we mentioned on the
previous page, the open differential always applies the same torque to both
wheels. If one of the front tires and one of the back tires comes off the
ground, they will just spin helplessly in the air, and you won't be able to
move at all.
The solution to these problems is the limited slip
differential (LSD), sometimes called positraction. Limited
slip differentials use various mechanisms to allow normal differential action
when going around turns. When a wheel slips, they allow more torque to be
transferred to the non-slipping wheel.
No comments:
Post a Comment